22-machine production facility inside our Dallas-Ft. Worth facility.
From heavy-duty 50-taper roughing to micron-level finishing.
We use massive 50-Taper vertical machining centers to “hog out” steel blocks and castings, removing material with brute force and high torque. Then, we move the part to our high speed 40-Taper Okuma Genos finishers. Running at 15,000 RPM, they execute “High-Speed Machining” (HSM) toolpaths to deliver mirror finishes and tight tolerances.
Optimized tool life reduces overhead.
Rigid finishing spindles ensure Class-A cosmetics.
Stop managing two vendors for one part. We perform high-volume drilling, tapping, boring, and facing on all metal components in-house.
Automated tapping for 10,000+ pc runs
Built for torque.
Our AWEA 1600 handles parts up to 63″ x 31.5″, capable of machining tough alloys like Inconel, Tool Steel, and Castings.
63″ Travel Capacity
From production pins on our Leadwell CNC to heavy shaft repair on the Monarch Long Bed. We handle both high-volume and high-mix turning.
+/- 0.001″ Tolerance.
We believe in transparency. Here is the heavy iron that backs up our promise.
| Machine Type | Make / Model | Key Specs |
|---|---|---|
| CNC-VMC | AWEA 1600 | 63" X 31.5" |
| CNC-VMC | OKUMA MC6-VAE | 60" X 24.75" |
| CNC-VMC | Yang Ming | 20" x 40" |
| CNC-VMC | OKUMA MC6-VAE | 60" X 24.75" |
| CNC-VMC | OKUMA M560-V | 41.34" X 22.05" |
| CNC-VMC | OKUMA M560-V | 41.34" X 22.05" |
| Surface Grinder | Acer AGS 16-32 AHD | 16" X 32" |
| Surface Grinder | Brown and Sharpe | 6" X 18" |
| Surface Grinder | Kent | 6" X 18" |
| Surface Grinder | Brown and Sharpe Techmaster | 6" X 18" |
| Blanchard Grinder | Blanchard # 22 | 42" |
| Tool Grinder | Rush #250A | |
| Radial Drill | Boice Crane | 36" X 10" |
| Radial Drill | Caser | 55" X12.50" |
| Bridgeport | W / Digital Readout | 9" X 54" |
| Wire EDM | Charmilles Robofil 310 | 15.75x9.80x15.75 |
| Wire EDM | Charmilles Robofil 500 | 27.5x15.75x15.75 |
| Hole Popper | Genspark America TD25 ZNC | 18 X 25 |
| Lathe | Hardinge Tooling Lathe | |
| CNC Lathe | Leadwell | 13" CHUCK |
| Tool Room Hone | Sunnen | |
| Lathe | Monarch Long Bed | 20.5" X 90" |
| Hydraulic Shear | Guifil GH415 | 60" |
| Hydraulic Shear | Niagara | 120" |
| Hydraulic Shear | Aluke | 120" |
| Vert Bandsaw | Roll-In Saw | |
| Vert Bandsaw | Roll-In Saw | |
| Horz Bandsaw | Turn-Pro BS-250 | |
| Horz Bandsaw | Wellsaw 1338 | 38" Cut |
Precise. Reliable. Scalable.
EV & ICE
Cosmetic & Functional
Mission-Critical Durability
Heavy-Duty Reliability
Surgical-Grade Finish
Find quick answers to common questions about our machining processes.
We are a true single-source partner. We perform secondary machining (drilling, tapping, facing) in-house at our Dallas facility. This eliminates the transit time and markup of a third-party shop.
“Roughers” use high torque (50-Taper) to remove material fast. “Finishers” use high RPM (15,000) for perfect surfaces. By separating them, we reduce your part cost and ensure tighter tolerances.
Yes. Our heavy-duty AWEA and Okuma MC6 machines are geared specifically for the high-torque requirements of machining raw iron castings and steel forgings.
We routinely hold ±0.0005” on milled features and ±0.0001” on ground surfaces, validated by our in-house Zeiss CMM lab.
Streamline your supply chain. We handle the stamping, machining, and finishing under one roof to reduce lead times and logistics costs.
